Average Reviews:
(More customer reviews)If you have a 4 button ademco keyfob, chances are you have at least 1 extra button (normally there are buttons for off, on, panic, and then you run out of things to do). That 4th button activates this switch which has a normally open / normally closed output rated at 2A / 28VDC. The switch itself requires 9VAC or 12VDC to run, so be sure to have voltage present to operate it.
People often mistake that it can be programmed to operate from the 5800 series transmitter on your panel. IT CAN NOT. It only listens for unused buttons on the wireless devices (keypad, etc) and can enroll up to 8 devices to activate its one relay out.
I use it for a keychain mounted controller to my electric gate - it gives me a handheld way to open the gate in addition to the pushbutton in car garage door opener design. It is handy if I am walking into a secure area and wish to open the gate partway to walk through then close it behind me and engage the 1200 pound mag locks to secure the gate.
Programming of that 4th button in your panel is an option as well (you could have it turn on lighs via x11 or some other feature) but be certain that the panel's receiver can hear your keyfob where you intend to use it. Consult the ademco vista series programming manual for further instructions here.
Click Here to see more reviews about: 5843 - Wireless Switch Module
Get 26% OFF
Click here for more information about 5843 - Wireless Switch Module
No comments:
Post a Comment